To achieve and maintain high international standards of the published papers, journal THERMAL SCIENCE engage of reputed experts from different countries in the International Advisory board (45 experts from 25 countries, from Europe, America, Australia and Asia), and in Regional Editorial board 12 member from all countries in South-East European region (Bosnia&Herzegovina, Bulgaria, Croatia, Greece, Macedonia, Montenegro, Romania, Serbia, Slovenia and Turkey).

Thermal Science Editorial Boards

Editor-in-Chief:

Prof. Simeon OKA, Ph. D. (Laboratory for Thermal Engineering and Energy, Vinča Institute of Nuclear Sciences, University of Belgrade)

National Editorial Board

Vukman Bakić , Ph. D., editor, Research Professor (Laboratory for Thermal Engineering and Energy, Vinča Institute of Nuclear Sciences, University of Belgrade)

Miroslav Sijerčić , Ph. D., subject editor (turbulence and CFD), Research Professor (Laboratory for Thermal Engineering and Energy, Vinča Institute of Nuclear Sciences, University of Belgrade)

Prof. Vladimir Stevanović , Ph. D., subject editor (two-phase flows) (Faculty of Mechanical Engineering, University of Belgrade, Belgrade)

Ass. prof. Nenad Miljić , Ph. D., subject editor (IC engines) (Faculty of Mechanical Engineering, University of Belgrade, Belgrade)

Prof Stojan Petrović , subject editor (IC engines) (Faculty of Mechanical Engineering, University of Belgrade)

Predrag Stefanović , Ph. D., Research Professor (Laboratory for Thermal Engineering and Energy, Vinča Institute of Nuclear Sciences, University of Belgrade)

Prof. Dragoslava Stojiljković , Ph. D. (Faculty of Mechanical Engineering, University of Belgrade, Belgrade)

Ass. prof. Maja Todorović , Ph. D. (Faculty of Mechanical Engineering, University of Belgrade, Belgrade)

Dejan Cvetinović , Ph. D., Ass. Research Professor (Laboratory for Thermal Engineering and Energy, Vinča Institute of Nuclear Sciences, University of Belgrade)

Mladen Ilić , Ph. D., Ass. Research Professor (Energy Saving Group, Belgrade)

Nenad Milošević , Ph. D., Assoc. Research Professor (Laboratory for Thermal Engineering and Energy, Vinča Institute of Nuclear Sciences, University of Belgrade)

Milijana Paprika , Ph. D., subject editor (fluidized beds and RES), Ass. Research Professor (Laboratory for Thermal Engineering and Energy, Vinča Institute of Nuclear Sciences, University of Belgrade)

Regional Editorial Board

Prof. Neven Duić , Ph. D. (Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, Zagreb, Croatia)

Prof. Iztok Golobič , Ph. D. (Faculty of Mechanical Engineering, University of Ljubljana, Ljubljana, Slovenija)

Prof. Željko Grbavčić , Ph. D. (Faculty of Technology and Metallurgy, University of Belgrade, Belgrade, Serbia)

Prof. Petar Gvero , Ph. D. (Faculty of Mechanical Engineering, University of Banja Luka, Banja Luka, Republic of Srpska (B&H))

Prof. Jordan Hristov , Ph. D. (Department of Chemical Engineering, University of Chemical Technology and Metallurgy, Sofia, Bulgaria)

Prof. Emmanuel Kakaras , Ph. D. (Faculty of Mechanical Engineering, National Technical University of Athens, Athens, Greece)

Prof. Nenad Kažic , Ph. D. (Faculty of Mechanical Engineering, University of Podgorica, Podgorica, Montenegro)

Assoc. Prof. Alina Adriana Minea , Ph. D. (Technical University Gheorghe Asachi, Iasi, Romania)

Prof. Hakan F. Oztop , Ph. D. (Department of Mechanical Engineering, Technology Faculty, Fırat University, Elazig, Turkey)

Ass. Prof. Risto V. Filkoski , Ph. D. (University "Sts Cyril and Methodius", Faculty of Mechanical Engineering, Karpos II nn, P.O.Box 464, Skopje 1000-MK, Republic of Macedonia)

Prof. Valentino Stojkovski , Ph. D. (Faculty of Mechanical Engineering, University "St. Kiril and Metodij", Skopje, Republic of Macedonia)

Prof. Dragoslav Šumarac , Ph. D. (Faculty of Civil Engineering, University of Belgrade, Belgrade, Serbia)

International Advisory Board

  • Ali, Hafiz Muhammad, Department of Mechanical Engineering, University of Engineering and Technology, Taxila, Pakistan
  • Anthony, E. J., CETC, NRCAN, Ottawa, Ont., Canada
  • Atangana, Abdon, Institute for Groundwater Studies, Faculty of Natural and Agricultural Sciences, University of the Free State, South Africa
  • Baleanu, Dumitru, Department of Mathematics and Computer Sciences, Cankaya University, Ankara, Turkey
  • Bennacer, Rachid, Civil and Envirenmental Engeneering Department, Ecole Normale Superieure-Cachan, France
  • Bianco, Vincenzo, Department of Mechanical, Energy, Management and Transportation Engineering, Università degli Studi di Genova, Genova, Italy
  • Borodulya, V. A., A. V. Luikov Heat and Mass Transfer Institute, Minsk, Belarus
  • Burdukov, A. P., Kutateladze Institute of Thermophysics, Siberian Branch of the Russian Academy of Sciences Novosibirsk, Russia
  • Colangelo, Gianpiero, Department of Engineering for Innovation, Università del Salento, Lecce, Italy
  • Durst, F., Chair for Fluid Mechanics, Friedrich-Alexander University, Erlangen, Germany
  • Ganaoui, Mohammed El, Université de Lorraine, Nancy, France
  • GhaffarianHoseini, AmirHosein, Department Geography, Faculty of Arts and Social Science, University of Malaya (UM), Kuala Lumpur, Malaysia
  • Hanjalić, K., Faculty of Applied Sciences, Delft University of Technology, Delft, The Netherlands
  • He, J. H., Nantong Textile Institute, National Engineering Laboratory for Modern Silk, Soochow University, Suzhou, China
  • Hooman, Kamel, The University of Queensland, Brisbane, Queensland Geothermal Energy Centre of Excellence, School of Engineering, Australia
  • Horio, M., Department of Chemical Engineering, Tokyo University of Agriculture and Technology, Tokyo, Japan
  • Ishii, M., School of Nuclear Engineering, Purdue University, W. Lafayette, Ind., USA
  • Jovanović, J., Chair for Fluid Mechanics, Friedrich-Alexander University, Erlangen, Germany
  • Kanevče, G., Faculty of Engineering, University of Bitola, Bitola, Republic of Macedonia
  • Kaschnitz, Erhard, Austrian Foundry Research Institute, Leoben, Austria
  • Khodadadi, Reza, Kingston University London, London, England
  • Leckner, B., Department of Energy Conversion, Chalmers University of Technology, Göteborg, Sweden
  • Lorenzini, Giulio, Department of Industrial Engineering, University of Parma, Parma, Italy
  • Manović, Vasilije, School of Engineering, Cranfield University, Cranfield, United Kingdom
  • Mayinger, F., Chair for Thermodynamics, Technical University Munich, Munich, Germany
  • Miccio, M., Department of Chemical and Food Engineering, University of Salerno, Salerno, Italy
  • Mohseni-Languri, E., Department of Mechanical Engineering, Tennessee Tech University, Cookeville, Tenn., USA
  • Mujumdar, A. S., Department of Mechanical and Production Engineering, National University of Singapore, Singapore
  • Nakoryakov, V. E., Kutateladze Institute of Thermophysics, Siberian Branch of the Russian Academy of Sciences Novosibirsk, Russia
  • Novak, P. D., School of Technologies and Systems, Novo Mesto, Slovenia
  • Nyers, Jozsef, Doctoral School of Applied Informatics and Applied Mathematics, Obuda University Budapest, Hungary
  • Ots, A., Power Engineering Department, Tallinn Technical University Tallinn, Estonia
  • Pokusaev, B. G., Chair of Thermodynamics and Heat Transfer, Moscow Institute for Chemical Mechanical Engineering, Moscow, Russia
  • Radulović, P., Advanced Combustion Engineering Research Center, Brigham Young University, Provo, Ut., USA
  • Rao, Zhong-Hao, School of Electric Power Engineering, China University of Mining and Technology, Xuzhou, China
  • Riznić, J., Operational Engineering Assessment Division, Canadian Nuclear Safety Commission, Ottawa, Ont., Canada
  • Sekulić, D., Department of Mechanical Engineering, University of Kentucky, Lexington, Ken., USA
  • Šašić, S., Department of Applied Mechanics, Chalmers University of Technology, Göteborg, Sweden
  • Terekhov, V. I., Kutateladze Institute of Thermophysics, Siberian Branch of the Russian Academy of Sciences Novosibirsk, Russia
  • Tomić, Miroljub, Faculty of Mechanical Engineering, University of Belgrade, Belgrade, Serbia
  • Tuponogov, V.G., Ural Energy institute, Ural Federal University, Ekaterinburg, Russia
  • van Wachem, B., Imperial College London, Department of Mechanical Engineering, London, England
  • Xie, Gongnan, School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an, China
  • Yang, Xiao-Jun, Department of Mathematics and Mechanics, China University of Mining and Technology, Xuzhou, China
  • Zhang, Li-Zhi, Key Lab of Heat Transfer and Energy Conservation, South China University of Technology, Guangzhou, China