Main Article Content
In this study heat transfer and fluid flow analysis in a wavy channel is numerically studied, while a magnetic field is applied in transverse direction to the main flow stream. Recently in a numerical study, we have observed that usage of wavy channel instead of straight one enhances heat exchange between the core flow and hot walls. On the other hand, the usage of magnetic field transverse to hot walls can enhance heat transfer in a straight channel. In this paper, we would like to examine if presence of these two methods simultaneously is useful for enhancement of heat exchange. For this purpose, the governing equations are numerically solved in the domain by the control volume approach based on the SIMPLE technique. Numerical studies are performed over a range of Reynolds number, Hartmann number and the wave amplitude. From this study, it is concluded that heat transfer in channels can be enhanced by the usage of magnetic field or usage of wavy channel instead of a straight one. But simultaneous usage of magnetic field and wavy channel is not recommended.
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors retain copyright of the published article and have the right to use the article in the ways permitted to third parties under the - Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International (CC BY-NC-ND) licence. Full bibliographic information (authors, article title, journal title, volume, issue, pages) about the original publication must be provided and a link must be made to the article's DOI.
The authors and third parties who wish use the article in a way not covered by the the -Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International (CC BY-NC-ND) licence must obtain a written consent of the publisher. This license allows others to download the paper and share it with others as long as they credit the journal, but they cannot change it in any way or use it commercially.
Authors grant to the publisher the right to publish the article, to be cited as its original publisher in case of reuse, and to distribute it in all forms and media.
 Jafari, M., Farhadi, M., Sedighi, K., Pulsating flow effects on convection heat transfer in a corrugated channel: A LBM approach, International Communications in Heat and Mass Transfer, 45 (2013), pp. 146–154.
 Ferley, D.M., Ormiston, S.J., Numerical Analysis of Laminar Forced Convection in Corrugated-Plate Channels with Sinusoidal, Ellipse, and Rounded-vee Wall Shapes, Numerical Heat Transfer, Part A: Applications, 63 (2013), pp. 563-589.
 Taymaz, Y., Parmaksizoglu, C., The effect of channel height on the enhanced heat transfer characteristics in a corrugated heat exchanger channel, Applied Thermal Engineering, 23 (2003), pp. 979–987.
 Naphon, P., Effect of corrugated plates in an in-phase arrangement on the heat transfer and flow developments, International Journal of Heat and Mass Transfer, 51 (2008), pp. 3963–3971.
 Ahmed, M.A., Shuaib, N.H., Yusoff, M.Z., Numerical investigations on the heat transfer enhancement in a wavy channel using nanofluid, International Journal of Heat and Mass Transfer, 55 (2012), pp. 5891-5898.
 Ahmed, M.A., Shuaib, N.H., Yusoff, M.Z., Al-Falahi, A.H., Numerical investigations of flow and heat transfer enhancement in a corrugated channel using nanofluid, International Communications in Heat and Mass Transfer, 38 (2011), pp. 1368-1375.
 Heidary, H., Kermani, M.J., Effect of nano-particles on forced convection in sinusoidal-wall channel, International Communications in Heat and Mass Transfer, 37 (2010), pp. 1520–1527.
 Heidary, H., Kermani, M.J., Heat transfer enhancement in a channel with block(s) effect and utilizing Nano- fluid, International Journal of Thermal Sciences, 57 (2012), pp. 163-171.
 Yang, Y.T., Chen, P.J., Numerical Simulation of Fluid Flow and Heat Transfer Characteristics in Channel with V Corrugated Plates, Heat and Mass Transfer, 46 (2010), pp. 437–445.
 Taymaz, I., Islamoglu, Y., Prediction of convection heat transfer in converging-diverging tube for laminar air flowing using back-propagation neural network, International Communications in Heat and Mass Transfer, 36 (2009), pp. 614–617.
 Zimparov, V., Penchev, P.J., Performance Evaluation of Deep Spirally Corrugated Tubes for Shell-and-Tube Heat Exchangers, Journal of Enhanced Heat Transfer, 11 (2004), pp. 423-434.
 Heidary, H., Kermani, M.J., Performance enhancement of fuel cells using bipolar plate duct indentations, International Journal of Hydrogen Energy, 38 (2013), pp. 5485–5496.
 Wu, F., Zhou, W., Numerical simulation and optimization of convective heat transfer and pressure drop in corrugated tubes, Heat Transfer Research, 43 (2012), pp. 527-544.
 Ece, M.C., Büyük, E., Natural convection flow under a magnetic field in an inclined rectangular enclosure heated and cooled on adjacent walls, Fluid Dynamics Research, 38 (2006), pp. 564–590.
 Jue, T., Analysis of combined thermal and magnetic convection ferrofluid flow in a cavity, International Communications in Heat and Mass Transfer, 33 (2006), pp. 846–852.
 Mahmoudi, A.H., Pop, I., Shahi, M., Effect of magnetic field on natural convection in a triangular enclosure filled with nanofluid, International journal of thermal sciences, 59 (2012), pp. 126-140.
 Ghasemi, B., Aminossadati, S.M., Raisi, A., Magnetic field effect on natural convection in a nanofluid field square enclosure, International journal of thermal sciences, 50 (2011), pp. 1748-1756.
 Davoudian, M., Arab Solghar, A., The investigation of natural convection heat transfer in a square cavity containing nanofluid with a vertical plate at the center under magnetic field, Heat transfer research, article in press (2014), DOI: 10.1615/HeatTransRes.2014007062.
 Jena, S.K., Mahapatra, S.K., Sarkar, A., Magnetoconvection of an electrically conducting fluid in an annular space between two isothermal concentric squares, Heat Transfer Research, 44 (2013), pp. 195-214.
 Nemati, H., Farhadi, M., Sedighi, K., Ashorynejad, H.R., Fattahi, E., Magnetic field effects on natural convection flow of nanofluid in a rectangular cavity using the Lattice Boltzmann model, Scientia Iranica, 19 (2012), pp. 303-310.
 Aminossadati, S.M., Raisi, A., Ghasemi, B., Effects of magnetic field on nanofluid forced convection in a partially heated microchannel, International journal of Non-linear Mechanics, 46 (2011), pp. 1373-1382.
 Patankar, S.V., Spalding, D.B., a Calculation procedure for heat, mass and momentum transfer in three- dimensional parabolic flows, International journal of Heat and Mass Transfer, 15 (1972), pp. 1787–1806.
 Rhie, C.M., Chow, W.L., Numerical study of the turbulent flow past an airfoil with trailing edge separation, AIAA journal, 21 (1983), pp. 1525–1532.
 Ferziger, J.H., Peric, M., Computational Methods for Fluid Dynamics, 3rd ed., Springer Verlag, Berlin Heidelberg, New York, USA, 2002.
 Back, L.H., Laminar heat transfer in electrically conducting fluids flowing in parallel plate channels, International Journal of Heat and Mass Transfer, 11 (1968), pp. 1621–1636.