REVIEW OF INVESTIGATIONS IN ECO - FRIENDLY THERMOACOUSTIC REFRIGERATION SYSTEM

Main Article Content

Ashish S. RAUT Uday S. WANKHEDE

Abstract

Abstract - To reduce greenhouse gas emissions, internationally research and development is intended to improve the performance of conventional refrigeration system also growth of new-fangled refrigeration technology of potentially much lesser ecological impact.  This paper gives brief review of research and development in thermoacoustic refrigeration also  the existing situation of thermoacoustic refrigeration system. Thermoacoustic refrigerator is  a novel sort of energy conversion equipment which converts acoustic power into heat energy by thermo acoustic effect. Thermoacoustic refrigeration is an emergent refrigeration technology in which there are no moving elements or any environmentally injurious refrigerants during its working. The concept of thermoacoustic refrigeration system is explained, the growth of thermoacoustic refrigeration, various investigations into thermoacoustic refrigeration system, various optimization techniques to improve COP, different stacks & resonator tube designs to improve heat transfer rate, various gases and other parameters like sound generation have been reviewed.

Article Details

How to Cite
RAUT, Ashish S.; WANKHEDE, Uday S.. REVIEW OF INVESTIGATIONS IN ECO - FRIENDLY THERMOACOUSTIC REFRIGERATION SYSTEM. Thermal Science, [S.l.], mar. 2017. ISSN 2334-7163. Available at: <http://thermal-science.tech/journal/index.php/thsci/article/view/2147>. Date accessed: 14 dec. 2017. doi: https://doi.org/10.2298/TSCI150626186R.
Section
Articles
Received 2017-03-02
Accepted 2017-03-13
Published 2017-03-13

References

[1] Swift G.W., Thermoacoustic engines and refrigerators, Physics Today, 48 (1995), 2, pp. 22-28
[2] Huelsz G. and Ramos E., On the phase difference of the temperature and pressure waves in the thermoacoustic effect, International Communications in Heat and Mass Transfer, 22(1995),1, pp.71-80
[3] Piccolo A. and Cannistraro G., Convective heat transport along a thermoacoustic couple in the transient regime, International Journal of Thermal Science, 41(2002), pp. 1067-1075
[4] Tijani M.E.H., Zeegers J.C.H., and De Waele A.T.A.M, Design of thermoacoustic refrigerators, Cryogenics, 42 (2002), 1, pp. 49-57
[5] Daming Sun, Limin Qiu, Bo Wang, Yong Xiao, Novel Helmholtz resonator used to focus acoustic energy of thermoacoustic engine, Applied Thermal Engineering, 29 (2009), pp.945–949
[6] Bheemsha, Ramesh Nayak. B, Pundarika.G, Design and Optimization of a Thermo Acoustic Refrigerator, International Journal of Emerging trends in Engineering and Development, 2 (2011), 1, pp. 112-118
[7] Waxier R., Stationary velocity and pressure gradients in a thermoacoustic stack, Journal of the Acoustical Society of America, 109 (2001), 6, pp. 2739-2750
[8] Herman C, and Wetzel M., Design optimization of thermoacoustic refrigerators, International Journal of Refrigeration, 20 (1997), 1, pp. 3-21
[9] Anirudhha Worlikar, Omar M. Knio, Rupert Klein, Numerical Simulation of a Thermoacoustic Refrigerator, ESAIM Proceedings, 1 (1996), pp. 363-375
[10] Tijani M.E.H., Spoelstra S., Bach P.W., Thermal-relaxation dissipation in thermoacoustic systems, Applied Acoustic, 65 (2004), 1, pp.1-13
[11] Hadi Babaei, Kamran Siddiqui, Design and optimization of thermoacoustic devices, Energy Conversion and Management, 49 (2008), pp.3585–3598
[12] K. Ghorbanian, M. Karimi, Design and optimization of a heat driven thermoacoustic refrigerator, Applied Thermal Engineering, 62 (2014), 2, pp. 653–661
[13] N.M. Hariharan, P. Sivashanmugam, S. Kasthurirengan, Optimization of thermoacoustic refrigerator using response surface methodology, Journal of Hydrodynamics, Ser. B, 25 (2013), 1, pp.72–82
[14] Ried R.S., and Swift G.W., Experiments with a flow-through thermoacoustic refrigerator, Journal of the Acoustical Society of America, 108 (2000), 6, pp. 2835-2842
[15] Luke Zoontjens, Carl Q. Howard, Anthony C. Zander and Ben S. Cazzolato, Development of a Low-Cost Loudspeaker-Driven Thermoacoustic Refrigerator, Proceedings of Acoustics, Busselton, Western Australia, ( 2005), pp.15-19
[16] J. A. Lycklama a Nijeholt, M.E.H. Tijani, S. Spoelstra, Simulation of a Travelling-Wave Thermoacoustic engine using computational fluid dynamics, Journal of Acoustical Society of America, 118 (2008), 4, pp. 2265-2270
[17] Raspet R., Brewster J., and Bass H. E., A new approximation method for thermoacoustic calculations, Journal of the Acoustical Society of America, 103 (1998), 5, pp. 2387- 2395
[18] Bheemsha, Ramesh Nayak. B, Pundarika.G, Design of the Resonator Tube and Buffer Volume for Thermo Acoustic Refrigerator, International journal of Advanced Scientific and Technical Research, 2 (2011), 1, pp. 215-220
[19] Tijani M.E.H., Zeegers J.C.H., and De Waele A.T.A.M., Construction and performance of a thermoacoustic refrigerator, Cryogenics, 42 (2001), 1, pp.59-66
[20] N.M. Hariharan, P. Sivashanmugam, S. Kasthurirengan, Experimental investigation of a thermoacoustic refrigerator driven by a standing wave twin thermoacoustic prime mover, International Journal of Refrigeration, 36 (2013), 8, pp. 2420–2425
[21] N.M. Hariharan, P. Sivashanmugam, S. Kasthurirengan, Influence of stack geometry and resonator length on the performance of thermoacoustic engine, Applied Acoustics,73 (2012), 10, pp. 1052–1058
[22] Ishikawa H., and David J., Numerical investigations of flow and energy fields near a thermoacoustic couple, Journal of the Acoustical Society of America, 111 (2002), 2, pp. 831-839
[23] M.M. Bassem, Y. Ueda, A. Akisawa, Design and construction of a traveling wave thermoacoustic refrigerator, International Journal of Refrigeration, 34 (2011), pp. 1125-1131
[24] Ishikawa H., and Hobson P. A., Optimization of heat exchanger design in a thermoacoustic engine using a second law analysis, International Communications in Heat and Mass Transfer, 23 (1996), 3, pp. 325-334
[25] Biwa T., Sunahara S., and Mitzutani U., Thermoacoustic effect in a Gifford - Mcmahon refrigerator, Journal of Applied Physics, 92 (2002), 10, pp. 6334-6336
[26] Pierrick Lotton, Philippe Blanc-Benon, Michel Bruneau, Vitaly Gusev, Serge Duffourd, Mikhail Mironov, Gaelle Poignand, Transient temperature profile inside thermoacoustic refrigerators, International Journal of Heat and Mass Transfer, 52 (2009), pp.4986–4996
[27] Hadi Babaei, Kamran Siddiqui, Modified theoretical model for thermoacoustic couples, International Journal of Thermal Sciences, 50 (2011), pp. 206-213
[28] R. S. Reid, G. W. Swift, Experiments with a flow-through thermoacoustic refrigerator, Journal of Acoustical Society of America, 108 (2000), 6, pp. 2834-2842
[29] Gaelle Poignand, Bertrand Lihoreau, Pierrick Lotton, Etienne Gaviot, Michel Bruneau, Vitaly Gusev, Optimal acoustic fields in compact thermoacoustic refrigerators, Applied Acoustics, 68 (2007), pp. 642–659
[30] Emmanuel C. Nsofor, Serdar Celik, Xudong Wang, Experimental study on the heat transfer at the heat exchanger of the thermoacoustic refrigerating system, Applied Thermal Engineering,27(2007),pp2435–2442
[31] A. Amjadi, M. R. Abolhassani and S. Basir Jafari, Acousto-Refrigerator with an Adjustable Mechanical Resonator, IJE Transactions B: Applications, 21 (2008), 2, pp.182- 196
[32] Emmanuel C. Nsofor, Azrai Ali, Experimental study on the performance of the thermoacoustic refrigerating system, Applied Thermal Engineering, 29 (2009), pp. 2672–2679
[33] Wetzel M., and Herman C., Experimental study of thermoacoustic effects on a single plate part I: temperature fields, Heat and Mass Transfer, 36 (2000), 1, pp. 7-20
[34] Bensoin E., and Knio O. M., Numerical study of thermoacoustic heat exchangers in the thin plate limit, Numerical Heat Transfer-Part A- Applications, 40 (2001), 5, pp. 455-471
[35] Insu Paek, Luc Mongeau, James E. Braun, Performance characterization of a small-capacity thermoacoustic cooler for air-conditioning applications, Journal of Mechanical Science and Technology, 24 (2010), 9, pp. 1781-1791
[36] N.M. Hariharan, P. Sivashanmugam, S. Kasthurirengan, Effect of resonator length and working fluid on the performance of twin thermoacoustic heat engine – Experimental and simulation studies, Computers & Fluids, 75 (2013), pp. 51–55
[37] Florian Zink, Hamish Waterer, Rosalind Archer, Laura Schaefer, Geometric optimization of a thermoacoustic regenerator, International Journal of Thermal Sciences, 48 (2009), pp. 2309–2322
[38] A. Piccolo, Optimization of thermoacoustic refrigerators using second law analysis, Applied Energy, (2012), pp. 1 -10
[39] Garrett S. L., Adeff J. A., and Hofler T. J., Thermoacoustic refrigerator for space applications, Journal of Thermoacoustics and Heat Transfer, 7 (1993), 4, pp. 595-599
[40] Moulay El Hassan, Tijani, Loudspeaker-driven thermo-acoustic refrigeration, Journal of Technische University Eindhoven, (2001), pp. 90-95
[41] Jin T., Chen G.B., Wang B.R., and Zhang S.Y., Application of thermoacoustic effect to refrigeration, Review of Scientific Instruments, 74 (2003), 1, pp. 677-679
[42] Sakamoto S., The experimental studies of thermoacoustic cooler, Ultrasonics, 42 (2004), 1, pp.53-56.
[43] R. C. Dhuley, M. D. Atrey, Investigations on a Standing Wave Thermoacoustic Refrigerator, International Cryocooler Conference, Inc, Boulder, CO,(2011), pp. 234-342
[44] S.H. Tasnim, S. Mahmud, R.A. Fraser, Effects of variation in working fluids and operating conditions on the performance of a thermoacoustic refrigerator, International Communications in Heat and Mass Transfe , 39 (2012), pp.762–768
[45] Bailliet H, Lotton P, Bruneau M, Gusev V, Acoustic power flow measurement in a thermoacoustic resonator by means of L.D.A. and microphonic measurement, Applied Acoustic, 60 (2000), pp.1–11
[46] Symko O.G., Abdel-Rahman E., Kwon Y.S., Emmi M., and Behunin R., Design and development of high-frequency thermoacoustic engines for thermal management in microelectronics. Microelectronics Journal, 35 (2004), 2, pp.185-191
[47] Fathi Jebali, Jean Valentin Lubiez, Maurice-Xavier Francois, Response of a thermoacoustic refrigerator to the variation of the driving frequency and loading, International Journal of Refrigeration, 27 (2004), pp.165–175
[48] Florian Zink, Hamish Waterer, Rosalind Archer, Laura Schaefer, Geometric optimization of a thermoacoustic regenerator, International Journal of Thermal Sciences, 48 (2009), pp. 2309–2322
[49] Kamran Siddiqui, Majid Nabavi, Measurement of the acoustic velocity characteristics in a standing-wave tube using out of phase PIV, Flow Measurement and Instrumentation, 19 (2008), pp. 364-369
[50] K. Tang, Z.J. Huang, T. Jin, G.B. Chen, Influence of acoustic pressure amplifier dimensions on the performance of a standing-wave thermoacoustic system, Applied Thermal Engineering,29(2009),pp950–956
[51] Kang Huifang, Li Qing, Zhou Gang, Synthetical optimization of hydraulic radius and acoustic field for thermoacoustic cooler, Energy Conversion and Management, 50 (2009), pp. 2098–2105
[52] Andrew C. Trapp, Florian Zink, Oleg A. Prokopyev, Laura Schaefer, Thermoacoustic heat engine modelling and design optimization, Applied Thermal Engineering, 31 (2011), pp. 2518-2528
[53] Wongee Chun, Seung Jin Oh, Yoon Joon Lee, Sang Hoon Lim, Rohit Surathu, Kuan Chen, Acoustic waves generated by a TA (Thermo Acoustic) laser pair, Energy, 45 (2012), pp.541-545
[54] Na Pan, Chao Shen, Shuangfeng Wang, Experimental study on forced thermoacoustic oscillation driven by loudspeaker, Energy Conversion and Management, 65 (2013), pp. 84–91
[55] Na Pan, Chao Shen, Shuangfeng Wang, Experimental study on the flow and heat transfer characteristics of thermoacoustic core, Experimental Thermal and Fluid Science, 44(2013),pp.219–226