FLAME EMISSION SPECTROSCOPY MEASUREMENT OF A STEAM BLAST AND AIR BLAST BURNER

Main Article Content

Viktor JÓZSA Krisztián SZTANKÓ

Abstract

Control and online monitoring of combustion have become critical to meet the increasingly strict pollutant emission standards. For such a purpose, optical sensing methods, like flame emission spectrometry, seem to be the most feasible technique. Spectrometry is capable to provide information about the local equivalence ratio inside the flame through the chemiluminescence intensity ratio measurement of various radicals. In the present study, a 15 kW atmospheric burner was analyzed utilizing standard diesel fuel. Its plain jet type atomizer was operated with both air and steam atomizing mediums. Up to now, injection of steam into the reaction zone has attracted less scientific attention contrary to its practical importance. Spatial plots of OH*, CH*, and C2* excited radicals were analyzed at 0.35, 0.7 and 1 bar atomization gauge pressures, utilizing both atomizing mediums. C2* was found to decrease strongly with increasing steam addition. The OH*/CH* and OH*/C2* chemiluminescence intensity ratios along the axis showed a divergent behavior in all the analyzed cases. Nevertheless, CH*/C2* chemiluminescence intensity ratio decreased only slightly, showing low sensitivity to the position of the spectrometer. The findings may be directly applied in steady operating combustion systems, i.e., gas turbines, boilers, and furnaces.

Article Details

How to Cite
JÓZSA, Viktor; SZTANKÓ, Krisztián. FLAME EMISSION SPECTROSCOPY MEASUREMENT OF A STEAM BLAST AND AIR BLAST BURNER. Thermal Science, [S.l.], mar. 2017. ISSN 2334-7163. Available at: <http://thermal-science.tech/journal/index.php/thsci/article/view/2175>. Date accessed: 24 june 2017. doi: https://doi.org/10.2298/TSCI150616062J.
Section
Articles
Received 2017-03-03
Accepted 2017-03-13
Published 2017-03-13

References

[1] A. H. Lefebvre, “Pollution control in continuous combustion engines,” Symp. Combust., vol. 15, no. 1, pp. 1169–1180, Jan. 1975.
[2] A. F. Sarofim and R. C. Flagan, “NOx control for stationary combustion sources,” Prog. Energy Combust. Sci., vol. 2, pp. 1–25, 1976.
[3] C. Bowman, “Control of combustion-generated nitrogen oxide emissions: technology driven by regulation,” Symp. Combust., pp. 859–878, 1992.
[4] T. Furuhata, T. Kawata, N. Mizukoshi, and M. Arai, “Effect of steam addition pathways on NO reduction characteristics in a can-type spray combustor,” Fuel, vol. 89, no. 10, pp. 3119–3126, Oct. 2010.
[5] C. Pereira, G. Wang, and M. Costa, “Combustion of biodiesel in a large-scale laboratory furnace,” Energy, vol. 74, pp. 950–955, 2014.
[6] C. D. Bolszo and V. G. McDonell, “Emissions optimization of a biodiesel fired gas turbine,” Proc. Combust. Inst., vol. 32, no. 2, pp. 2949–2956, 2009.
[7] A. Lefebvre and D. R. Ballal, Gas turbine combustion, Third edition, Boca Raton: CRC Press, 2010.
[8] C. K. Law, “Recent advances in droplet vaporization and combustion,” Prog. Energy Combust. Sci., vol. 8, no. 3, pp. 171–201, Jan. 1982.
[9] A. Lif and K. Holmberg, “Water-in-diesel emulsions and related systems.,” Adv. Colloid Interface Sci., vol. 123–126, no. 2, pp. 231–9, Nov. 2006.
[10] B. Breen, “Combustion in large boilers: design and operating effects on efficiency and emissions,” Symp. Combust., vol. 16, no. 1, pp. 19–35, 1977.
[11] Z. Li, Y. Wu, C. Cai, H. Zhang, Y. Gong, K. Takeno, K. Hashiguchi, and J. Lu, “Mixing and atomization characteristics in an internal-mixing twin-fluid atomizer,” Fuel, vol. 97, pp. 306– 314, Jul. 2012.
[12] S. M. Correa, “Power generation and aeropropulsion gas turbines: From combustion science to combustion technology,” Symp. Combust., vol. 27, no. 2, pp. 1793–1807, Jan. 1998.
[13] F. L. Dryer, “Water addition to practical combustion systems—Concepts and applications,” Symp. Combust., vol. 16, no. 1, pp. 279–295, Jan. 1977.
[14] D. Zhao, H. Yamashita, K. Kitagawa, N. Arai, and T. Furuhata, “Behavior and effect on NOx formation of OH radical in methane-air diffusion flame with steam addition,” Combust. Flame, vol. 130, no. 4, pp. 352–360, Sep. 2002.
[15] B. de Jager, J. B. W. Kok, and G. Skevis, “The effects of water addition on pollutant formation from LPP gas turbine combustors,” Proc. Combust. Inst., vol. 31, no. 2, pp. 3123–3130, Jan. 2007.
[16] W. Meier, P. Weigand, X. Duan, and R. Giezendannerthoben, “Detailed characterization of the dynamics of thermoacoustic pulsations in a lean premixed swirl flame,” Combust. Flame, vol. 150, no. 1–2, pp. 2–26, Jul. 2007.
[17] M. Juddoo and A. R. Masri, “High-speed OH-PLIF imaging of extinction and re-ignition in non-premixed flames with various levels of oxygenation,” Combust. Flame, vol. 158, no. 5, pp. 902–914, May 2011.
[18] M. Lackner, G. Totschnig, G. Loeffler, H. Hofbauer, and F. Winter, “In-situ laser spectroscopy of CO, CH4, and H2O in a particle laden laboratory-scale fluidized bed combustor,” Therm. Sci., vol. 6, no. 2, pp. 13–27, 2002.
[19] J. Ballester and T. García-Armingol, “Diagnostic techniques for the monitoring and control of practical flames,” Prog. Energy Combust. Sci., vol. 36, no. 4, pp. 375–411, Aug. 2010.
[20] D. Guyot, F. Guethe, B. Schuermans, A. Lacarelle, and C. O. Paschereit, “CH*/OH* Chemiluminescence response of an atmospheric premixed flame under varying operating conditions,” Proccedings ASME Turbo EXPO, pp. 1–12, 2010.
[21] T. Parameswaran, R. Hughes, P. Gogolek, and P. Hughes, “Gasification temperature measurement with flame emission spectroscopy,” Fuel, vol. 134, pp. 579–587, 2014.
[22] C. Romero, X. Li, S. Keyvan, and R. Rossow, “Spectrometer-based combustion monitoring for flame stoichiometry and temperature control,” Appl. Therm. Eng., vol. 25, pp. 659–676, 2005.
[23] T. M. Muruganandam, B. H. Kim, M. R. Morrell, V. Nori, M. Patel, B. W. Romig, J. M. Seitzman, L. Zimmer, P. Jansohn, J. Walewski, and D. Ferguson, “Optical equivalence ratio sensors for gas turbine combustors,” Proc. Combust. Inst., vol. 30 I, no. 1, pp. 1601–1609, 2005.
[24] M. M. Tripathi, S. R. Krishnan, K. K. Srinivasan, F. Y. Yueh, and J. P. Singh, “Chemiluminescence-based multivariate sensing of local equivalence ratios in premixed atmospheric methane-air flames,” Fuel, vol. 93, pp. 684–691, 2012.
[25] J. Kojima, Y. Ikeda, and T. Nakajima, “Basic aspects of OH(A), CH(A), and C2(d) chemiluminescence in the reaction zone of laminar methane-air premixed flames,” Combust. Flame, vol. 140, pp. 34–45, 2005.
[26] B. Higgins, M. Q. McQuay, F. Lacas, and S. Candel, “An experimental study on the effect of pressure and strain rate on CH chemiluminescence of premixed fuel-lean methane/air flames,” Fuel, vol. 80, pp. 1583–1591, 2001.
[27] B. Higgins, M. Q. McQuay, F. Lacas, J. C. Rolon, N. Darabiha, and S. Candel, “Systematic measurements of OH chemiluminescence for fuel-lean, high-pressure, premixed, laminar flames,” Fuel, vol. 80, no. x, pp. 67–74, 2001.
[28] T. Parameswaran, P. Gogolek, and P. Hughes, “Estimation of combustion air requirement and heating value of fuel gas mixtures from flame spectra,” Appl. Therm. Eng., 2014.
[29] N. Docquier, F. Lacas, and S. Candel, “Closed-loop equivalence ratio control of premixed combustors using spectrally resolved chemiluminescence measurements,” Proc. Combust. Inst., vol. 29, pp. 139–145, 2002.
[30] W. Hwang, J. Dec, and M. Sjöberg, “Spectroscopic and chemical-kinetic analysis of the phases of HCCI autoignition and combustion for single- and two-stage ignition fuels,” Combust. Flame, vol. 154, no. 3, pp. 387–409, 2008.
[31] R. L. Gordon and E. Mastorakos, “Autoignition of monodisperse biodiesel and diesel sprays in turbulent flows,” Exp. Therm. Fluid Sci., vol. 43, pp. 40–46, 2012.
[32] S. S. S. Merola, L. Marchitto, C. Tornatore, G. Valentino, I. M. Cnr, and V. G. M. Napoli, “Chemiluminescence analysis of the effect of butanol-diesel fuel blends on the spray- combustion process in an experimental common rail diesel engine,” Therm. Sci., pp. 1–20, 2014.
[33] N. A. Chigier, “The atomization and burning of liquid fuel sprays,” Prog. Energy Combust. Sci., vol. 2, no. 2, pp. 97–114, Jan. 1976.
[34] A. Kun-Balog and K. Sztankó, “Reduction of pollutant emissions from a rapeseed oil fired micro gas turbine burner,” Fuel Process. Technol., vol. 134, no. x, pp. 352–359, 2015.
[35] V. Józsa and A. Kun-Balog, “The effect of the flame shape on pollutant emission of premixed burner,” in Proceedings of the European Combustion Meeting – 2015, 2015, pp. P4–35.
[36] V. Kovács, Á. Bereczky, and G. Gróf, “Comparative Analysis of Renewable Gaseous Fuels by Flame Spectroscopy,” in 3rd European Combustion Meeting, 2007, pp. 1–4.
[37] V. Józsa and A. Kun-balog, “Spectroscopic analysis of crude rapeseed oil fl ame,” Fuel Process. Technol., vol. 139, pp. 61–66, 2015.
[38] Y.-H. Kang, Q.-H. Wang, X.-F. Lu, X.-Y. Ji, S.-S. Miao, H. Wang, Q. Guo, H.-H. He, and J. Xu, “Experimental and theoretical study on the flow, mixing, and combustion characteristics of dimethyl ether, methane, and LPG jet diffusion flames,” Fuel Process. Technol., vol. 129, pp. 98–112, 2015.